GRUNDFOS CME BOOSTER PUMP

The Grundfos CME Booster Pump is a small VFD-controlled booster system. It works for many home and light commercial uses. The CME Booster ensures great comfort by providing constant pressure, regardless of demand or inlet pressure variations. In addition, the CME booster makes it possible to adjust the water pressure by touching a button. Also, the CME Booster is very easy to install. Once the booster has been connected to the pipeline, it is simply a matter of putting the plug into a
socket and the system is operational.

Features

Constant pressure
The CME Booster always provides constant pressure
Robust design
The pump is made of materials that ensure excellent corrosion resistance. The pump housing, shaft, and impeller are made of high-quality stainless steel, while the rest of the pump is electrophoretically painted
Energy saving
The frequency controller of the CME Booster matches the power consumption with the required water output, which can save users up to 40% of power
Fully equipped
The CME Booster has a five-way fitting that
encompasses a non-return valve, a pressure sensor, a pressure gauge, and a diaphragm tank connection
Low noise
The CME Booster operates quietly at around 55 decibels, which is significantly silent than most pumps currently available in the market
User-friendly interface. The control panel on the pump features a user-friendly interface with LED indicators showing operational status and feather touch buttons for pressure adjustment
Dry-running protection
The CME Booster automatically stops if there is no water from the incoming pipeline

Thermal overload protection The CME Booster is effectively protected against any accidental overload by built-in thermal protection

Robust and reliable SCALA2 offers a long lifetime. It can even be installed outside. It’s made of quality materials and has protective measures dry-run protection and anti-cycling

Easy installation and self-priming
SCALA2 is an all-in-one solution designed
for fast and easy installation. Simply
connect the pipes, prime the pump and
connect to the power. It has a large priming
hole, which makes it easy to prime
Energy efficient
SCALA2 features a highly efficient permanent
magnet motor using only 550 W (Power
input max (P1)) and has a power
consumption of only 270 W in daily use
(3 bar/12 l/min)

Applications

Large houses
Domestic buildings
Cottage and villas
Mid-size Hotels
Mid-size Hospitals
Schools

Product Specification