Grundfos Water Pumps in Bangalore
Grundfos water pump dealer, distributor, and supplier for homes, and apartments across South India has a wide array of pump solutions and services for all applications in and around the house. Pumps that make everyday life better and easier.
Largest-selling pumps in the world
​
Modern people require a reliable water supply, perfect heating regulations, and easy wastewater disposal. And rightly so. They should be top priorities in any house and new build or renovation project. Our intelligent solutions and energy-saving technology already provide comfortable and convenient living conditions and we would like to make your house a better one too.
We deliver efficient, reliable, and sustainable solutions
GRUNDFOS WATER PUMP DEALERS, SUPPLIERS IN BANGALORE
SmART SUB, GIDPC Panels, CMB Booster with PT, CMB with PM, Pressure manager, CMBE, CMBE Twin, CM Twin, PM Twin, UPA Shower booster, Scala-2, Scala1 AP, KP, CC, KPC Drainers, SEG, APG Grinder, Sololift2 Basement toilet pump, CM, UPS, MAGNA3, Comfort, Circulation pump,
Applications: Grundfos provides many solutions in many areas with its array of world-class, cost & energy-efficient pumps for Domestic, Industrial, and Commercial Building Sector, Agriculture and Sewage & Drainage,
WIDE RAGE OF WATER PRESSURE PUMP FOR HOME AND APARTMENT
CMB BOOSTER PUMP WITH PT
​
​CM DOMESTIC WATER PRESSURE
BOOSTER PUMP
​
APPLICATIONS:
-
Mains boosting
-
Household water supply
-
Boosting from above ground water tanks
​
CM PUMP WITH PM PRESSURE PUMP
​
​​
APPLICATIONS:
-
Mains boosting
-
Household water supply
-
Boosting from above ground water tanks
​
​
UPA Shower Booster Pump
​APPLICATIONS:
· Boosting of hot or cold water supply.
​· Residential installation where higher pressure is
needed in taps, shower, or other domestic water
outlets connected to storage tank.
· Inlet boosting to the solar tank inlet. Ideal for gas
heaters and washing machines.
CM With 60L Tank
​APPLICATIONS:​
-
Mains boosting
-
Household water supply
-
Boosting from above-ground water tanks
​
​
SCALA1
APPLICATIONS OF SCALA1 WATER PUMP:
-
Taps and showers in the house and apartment
-
Garden and lawn irrigation
-
Greenhouses
-
Water transfer
-
Car wash
SCALA2
APPLICATIONS:
-
Boosting from mains
-
Boosting from tanks
-
Indoor & and outdoor installation
CMBE
APPLICATIONS:
-
Large houses
-
Domestic buildings
-
Cottage and villas
-
Midsize Hotels
-
Midsize Hospitals
-
Schools
Pressure Manager
APPLICATIONS:
-
Typical applications are water supply
-
systems and rainwater systems in:
-
One-family houses•
-
Blocks of flats•
-
Villas and cottages•
-
Horticulture and gardening•
-
•Agriculture​
PRESSURE BOOSTER TWIN PUMP SUPPLIER AND DEALER
CMBE TWIN BOOSTER PUMP, CM TWIN BOOSTER PUMP, AND CM WITH PM TWIN PUMP DEALER
GRUNDFOS CMBE Twin Booster Pump
The CMBE TWIN Booster pump is a compact
two-pump booster system for water supply in
domestic and light commercial applications that are
easy to install and commission. The integrated speed
the controller allows the CMBE Booster to maintain
constant pressure in the pipeline.
​
APPLICATIONS OF CMBE Twin Booster pump:
-
Large houses
-
Domestic buildings
-
Cottage and villas
-
Midsize Hotels
-
Midsize Hospitals
-
Community hostels
-
Schools
-
Playhouse & Green House farming​
CM Twin Booster
The CM Twin Booster pump set consists of two identical CM- pumps connected in parallel and mounted on a common base frame and a control cabinet incorporating motor protection and controller
​
APPLICATIONS OF CM TWIN BOOSTER PUMP:
-
Large houses
-
Domestic buildings
-
Cottages and villas
-
Midsize Hotels
-
Midsize Hospitals
-
Schools
​
CM WITH PM Twin Pumps
CM with PM Twin pump consists of two identical CM connected in parallel and works as duty & standby with a cascade feature, mounted on a common base frame. It comes with an intelligent controller PM TWIN which controls both and also protects the system
APPLICATIONS OF CM WITH PM TWIN PUMP:​
-
Domestic buildings
-
Cottages and villas
-
Horticulture & Gardening​
​
​
WATER TRANSFER PUMP DISTRIBUTORS
SMART SUB-SUBMERSIBLE PUMP, JET PUMP, AND GIDPC PANELS
SmART SUB (Open well submersible pump)
​SmART SUB submersible pump Series, Single Phase and Three Phase Horizontal open well Submersible
They are designed for underwater application,
so there is no need for priming or a
foot valve. These are suitable for open wells or tanks with wide fluctuations in water level.
APPLICATIONS PUMP:
-
sump to overhead
-
tank filling
-
Farms
-
Fountains
-
Industrial and rural
-
water supply
-
Gardening
-
Landscaping
JET PUMP
​The Jet Pump(JP) is a self-priming, single-stage
centrifugal JP is ideal for transferring water from wells or ground tanks.
JP has an excellent suction capacity and is designed for long, trouble-free operation. The built-in ejector with guide vanes ensures optimum self-priming properties.
JP is small and compact with a lifting handle that makes the pump handy and easy to carry.
APPLICATIONS OF JET PUMP
-
Water transfers from tanks below and above the ground level.
-
For treated water transfer.
​
GIDPC DOT
GIDPC DOT is a Digital Pump Controller for Domestic applications, which is an easy-to-use programmable device for single-phase pump (mono-block or submersibles that require only running capacitors). it can be used to control the pump up to 15 A.
​
APPLICATIONS:
GI DPC DOT is designed and built for managing and controlling residential water i.e. the water used for indoor and outdoor household purposes, such as water transfer, tank filling, tank emptying, drainage application, or pressure boosting. It is an ideal choice in residential segments, where water and energy conservation are paramount.
GIDPC SINGLE PHASE
SINGLE PUMP, SINGLE PHASE (1.5 TO 16A EACH)
TWO PUMP, SINGLE PHASE (1.5 TO 16A EACH)
GIDPC single phase is a Digital Pump Controller for
Domestic application, which is easy to use -
programmable device for single-phase pump
(mono-block or submersibles which require only
running capacitor). It can be used to control the
pump up to 15A
FEATURES:
-
LCD screen displays pump running information
-
Push button calibration
-
Overload protection
-
Motor stalled protection
-
Dry run protection without installing an oat switch
-
Under voltage protection (Default settings can be changed)
-
Over voltage protection (Default settings can be changed)
​
GIDPC THREE PHARSE
The GIDPC three-phase digital pump controller model is an easy-to-use device for direct start, can be programmed, and also protects the pump. The equipment is in three-phase with output power
ranging from 0.75 kW – 7.5 kW (1.5 - 16 A).
APPLICATIONS
-
Stormwater
-
Sewage
-
Booster sets
-
Rainwater reuse
-
Irrigation
-
Water supply
​
​
GIDPC PRO
1 PHASE, 1 PUMP UP TO 15 A
GIDPC PRO is a Digital Pump Controller, an easy-to-use, programmable device for single-phase pumps
(monoblock or submersible). It can be used to control
the pump up to 15 Ampere.
APPLICATIONS:
-
GIDPC PRO 1 Pump – 1 Phase is very useful in
water and wastewater applications, be it storm
water, sewage, rainwater reuse, irrigation,
water supply or pressure-boosting
-
It is an ideal choice for residential, industrial
or institutional segments where water
and energy conservation is of the utmost
importance
WATER DRAINAGE/DRAINER PUMP
UNILIFT-KPC PUMP, UNILIFT CC PUMP, UNILIFT KP PUMP, UNILIFT AP PUMP, AND UNILIFT AP50 SUPPLIER
GRUNDFOS Unlift KPC PUMP
​SUBMERSIBLE PUMP FOR YOUR HOME
The Unilift KPC Pump Series is designed mainly for automatically operated fixed applications in domestic use, draining basements, and garages that are subject to flooding. Its compact, easy-to-handle form makes it a portable pump for emergencies such as lifting water from tanks or emptying swimming pools, fountains, excavations, and underpasses. They are also ideal for gardening and fish ponds.
APPLICATIONS OF UNILIFT KPC PUMP :
-
Draining basements and garages.
-
Draining water from tanks and wells.
-
Emptying swimming pools.
-
Ideal for gardening, fountains, and fish ponds
Unlift CC
The Unilift CC pump is a single-stage
submersible pump that can pump up to 3 mm
water level.
APPLICATIONS OF UNILIFT CC PUMP
They are designed for pumping rainwater and grey wastewater from
-
washing machines, bathtubs, showers, and sinks from low-lying parts of the buildings up to sewer level
-
Cellars or buildings prone to flooding
-
Draining wells
-
Collecting wells for surface water with inlets from roof gutters, tunnels
-
•Swimming pools, ponds, or fountains. This pump is suitable for permanent installation or as a portable pump.​
Unlift KP
​The Unilift KP Pump is a single-stage, stainless steel drainage pump, compact in design with hermetically sealed stator housing (canned motor). The pump can be installed permanently or used as a portable pump. It may be operated fully or partially submerged.
The pump is suitable for the following
APPLICATIONS OF UNILIFT KP PUMP:
-
Pumping in drainage collecting wells
-
Pumping of wastewater without discharge from toiletsBreweries and the process industry​​
-
Drainage of flooded cellars or buildings
-
Emptying of swimming pools, tanks, and fountains
-
Applications within agriculture, horticulture, dairies
​
Unlift AP
UNILIFT AP Pump is a submersible wastewater
pump suitable for temporary and permanent free-standing installation. All are fitted with carrying handles. The UNILIFT AP pump has a stainless steel sleeve for cooling during operation.
APPLICATIONS OF UNILIFT AP PUMP:
-
Rainwater, drainage water, and water
-
from flooding Poolsl
-
Effluents from showers, washing
-
machines and sinks below sewer level
-
Water and rainwater in horticulture
​
UNILIFT AP50
UNILIFT AP 50 submersible wastewater
pump is suitable for temporary as well as
permanent free-standing installation. All are fitted with carrying handles. The UNILIFT AP has a stainless steel sleeve for cooling during operation.
APPLICATIONS
-
Rainwater, drainage water, and water
-
from flooding Poolsl
-
Effluents from showers, washing
-
machines and sinks below sewer level
-
Water and rainwater in horticulture​
​
WASTEWATER TRANSFER PUMP DISTRIBUTOR
APG GRINDER PUMP, SOLOLIFT2 SANITARY PUMP, MSS MULTI-LIFT PUMP, AND SEG GRINDER
APG Grinder
DOMESTIC WASTEWATER TRANSFER PUMPING
MADE RELIABLE, QUICK, AND EASY
APG GRINDER PUMP Designed to lift and transport domestic wastewater, prevent flooding, and reduce odors, the UNILIFT APG is a versatile and reliable grinder pump that pumps domestic sewage, especially toilet blackwater, from domestic buildings. It is equipped with a professional grinder system that is based on decades of innovation and used in commercial SEG pump ranges. It cuts solids and particles into small pieces, allowing domestic sewage and blackwater to be pumped vertically and horizontally over long distances to the sewer mains.
APPLICATIONS OF APG GRINDER PUMP:
Suited to a variety of applications, whether that is for
single-family houses or low-rise residential buildings,
the UNILIFT APG can be used inside a building within a
lifting station, usually in a basement below sewer level,
or outside a building within a pumping station. It can
also be installed as a stand-alone solution.
​
SOLOLIFT2 Sanitary Pump
The SOLOLIFT2 sanitary pump is a unique range of compact macerators, enabling drainage of any domestic sanitary appliance without worrying about the location of the existing gravity drain system. Whether it is an extra toilet in the attic or a new bathroom below the sewer level in the basement, SOLOLIFT2 will efficiently dispose of the wastewater and provide maximum protection against backflow from sewer systems. The SOLOLIFT2 range comprises five compact macerators, all designed to collect and pump wastewater from the
sanitary appliance to the nearest downpipe.
APPLICATIONS OF SOLOLIFT2 Sanitary Pump
-
Extra bathrooms even away from drainage stack (e.g. attics)
-
Backwater protection of sanitary
-
Appliances when placed below the sewer level
-
Added restroom and wellness facilities
-
in guest houses and holiday cottages
-
Office and building renovation
Multilift MSS
​The Multilift MSS is designed to collect and transfer wastewater (with feces) in single-family houses from a complete dwelling located below sewer level where drainage by gravity is impossible. The MULTILIFT MSS consists of a dry-installed pump, collecting tank, level sensor, wired controller, and a non-return valve, which are ready for installation and fully automatic, low-noise operation. The pump is made of stainless steel and has a clog-free vortex impeller. The collecting tank is pressure-tight, gas and odour-proof. Together with a blockage-free level sensor, the MULTILIFT MSS ensures trouble-free, reliable operation.
​
APPLICATIONS
-
Collection and disposal of wastewater in single-family houses or
-
light commercial applications
​
SEG Grinder
​TOUGH WASTEWATER TRANSFER PUMP
The SEG pump is specifically designed for pumping untreated wastewater from domestic, commercial, or municipal sources. The high discharge pressure enables the transfer of sewage over longer distances. To reduce maintenance time, the effective grinder system is easily and quickly dismantled in the event of replacement. These can transfer wastewater to the sewer mains in areas with no sewer systems or where gravitation systems are unsuitable.
​
BENEFITS
Enhanced reliability, Improved discharge pressure
over longer distances, Highly effective grinder system. enables smaller pressure pipes
SmartTrim system maintains high pressure by simply adjusting the impeller clearance, The Cable plug is sealed against the moisture entering through the cable core
​
HOT WATER CIRCULATION PUMP
MAGNA 3 PUMP-UPS PUMP-CM PUMP DISTRIBUTOR
MAGNA 3
​TAKING PUMP INTELLIGENCE TO THE NEXT LEVEL
The MAGNA3 is a circulator pump with a permanent magnet motor that will fit both heating, cooling, and domestic hot water circulation, making it the obvious choice for almost any building project old or new. With its unrivaled efficiency,
all-encompassing range, and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for building owners, engineers, and specifiers looking to create high-performance systems for buildings. The MAGNA3 is a pump with no maintenance requirements and extremely low Life Cycle Cost.
​
APPLICATIONS
-
Heating
-
Air-conditioning
-
Cooling
-
Domestic hot-water systems
-
Domestic heat pump
​​​​
UPS PUMP
​The UPS range of domestic circulator pump is suitable for liquid circulation in domestic heating and hot water systems. These wet-rotor circulators are whisper-quiet and maintenance-free. They feature an
integrated pump and motor design. The 3-speed switch on the UPS Basic motor allows you to adjust the pump speed
to meet the needs of your system, thereby reducing energy consumption and saving you money.
​
APPLICATIONS:
-
It is specially used in heating systems,
-
condenser and air-conditioning system
-
Hot water system in villas and apartments
-
Domestic hot water recirculation system
-
Heating system
​
​
CM PUMP
A SMALL PUMP WITH GIGANTIC POTENTIAL
It was once said that great things come in small
packages. You'll certainly agree when you meet the GCM pump for the first time. This horizontal multistage pump has been created with compactness and modularity as central features. Adding reliability and quiet operation to the mix, another innovative pump solution, the Centrifugal Modular, the pump is composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, regardless of the application.
APPLICATIONS:
-
Water treatment
-
Water Transfer
-
Water circulation (liquid temp 20 °C - 120 °C)
​
COMFORT UP
The COMFORT range is designed for the re-circulation of domestic hot water in small family houses. The COMFORT PM range is a high-efficiency choice with an energy usage of only 8 W. The intelligent COMFORT AUTOADAPT PM automatically adapts to the individual’s hot water consumption pattern in the household
and only runs when hot water is needed.
FEATURES:
Minimise water waste
Every year, a typical family of three
living in a household with a conventional
one string plumbing system pours up to
16.000 Lts of clean water straight down
the drain as they wait for the water to
run hot. The COMFORT PM pump
delivers instantly hot water, which in
average amounts to 60 seconds – or 0.15
litres of wasted water per second. The
tangible result of the COMFORT PM pump
lowers cost while increasing the comfort)
​
-
How does a SWH work?SWH works by absorbing sunlight through solar collectors, which convert the sunlight into thermal energy. This energy is used to heat water, which is then stored in an insulated tank for later use. Depending on the system, the water may be directly heated in the collectors or heated indirectly using a heat-transfer fluid.
-
What kind of solar system is required ?A) Flat plate collector (FPC) or Evacuated tube collector (ETC) a).If enquired about an ETC System......... (Can consider as LIG customer) b).If enquired about a FPC System........... (Can as consider MIG & HIG customer) A). Pressurised b) non pressurised Purpose of solar system? (Domestic or Commercial) If it is commercial find out the type or purpose of use. a)Apartment, Paying guest, Hospital, Hotel etc....along with the hot water demand per day b).Size of the Building, c).No of floors, d).No of bathrooms. e).No of people per room, e).Type of bathroom fixers to design the hot water demand If it is domestic, find out the type of building a).Own use – Duplex or Triplex, b).Own with rent house – Segregate rent and own use to serve the requirement based on their applications. c). SITE SIZE –50X80, 60X40, or 30x40 size d).No of floors,e).No of bathrooms d).No of people per room e).Type of Bath room fixers (normal shower, rain shower, body jets, multifunction system, thermostatic mixers and bath tubs ) Based on this, one can find out the customer’s budget as well as the hot water demand. f). Age group of the people, i).Usage pattern- morning or evening g).Type or size of the hot water pipeline insulated or normal system
-
What Is the typical requirement of hot water and applicationsApplication Typical requirement of hot water Household bathing 20-25 liters per person per bath Household bathing using shower with a mixing tap 30-35 litters Household bathing in bathtub 100-150 liters Wash basin with a mixing tap (hand wash, brushing of teeth etc.) 3-5 liters per person per day Kitchen washing 5-7 liters per person per day Dishwasher 40-50 liters per wash cycle Washing machine 40-80 liters per cycle
-
why should I choose SWH? how much can I save if I use one?Choosing a SWH is a smart investment because it significantly reduces your energy bills by harnessing free, renewable solar energy, lowering water heating costs by 70%. This eco-friendly solution decreases your carbon footprint, increases property value, and offers long-term savings that often outweigh the initial installation cost, especially with available government incentives. Over its lifespan, a SWH can save your money, providing reliable hot water with minimal maintenance.
-
What size SWH do I need for my home?The size of the SWH you need depends on your household size, hot water usage, and climate. Typically, a household of 1-2 people might need a system with 20-40 square feet of collector area and a 30-40 gallon storage tank. For 3-4 people, a 40-60 square feet collector area and a 50-80 gallon tank are recommended, while larger households of 5 or more may require 60-80+ square feet of collectors and an 80+ gallon tank. You might need a smaller system in sunnier climates, while cooler areas may require a larger one. I think consulting with a professional can help determine the best size for your specific needs.
-
Is a SWH effective in cold or cloudy climates?SWH can still be effective in colder or cloudy climates, but their efficiency may decrease. In colder regions, systems are designed with antifreeze solutions or are coupled with backup heating systems to ensure hot water is available even on cloudy days.
-
For how long does water from the SWH remain hot?The duration for which water from a SWH remains hot depends on several factors, including the insulation quality of the storage tank, the amount of sunlight received, the outside temperature, and the initial temperature of the heated water. Generally, a well-insulated SWH can keep water hot for 24 to 48 hours. The tank's insulation is key to minimizing heat loss, so even during the night or on cloudy days, the water should remain sufficiently warm for use the next day. In colder climates or during prolonged periods without sunlight, the water might cool down faster, but auxiliary heating systems or backup options can help maintain the desired water temperature.
-
What maintenance is required for a SWH?Periodic cleaning of the solar collectors. Checking and replacing the antifreeze solution (if applicable). Inspecting the system for leaks or corrosion. Ensuring the circulation pumps and controllers are functioning properly.
-
Can a SWH be integrated with an existing water heating system?Yes, SWH can be integrated with existing systems, providing a hybrid setup where solar energy is used primarily, and the conventional system acts as a backup during periods of insufficient sunlight
-
What factors should I consider before installing a SWH?Available sunlight: More sunlight increases efficiency. Roof orientation and space: South-facing roofs with ample space are ideal. Hot water demand: Larger households may need bigger systems. Local climate: Colder climates may require systems with antifreeze or backup heaters. Initial cost and incentives: Evaluate the cost and check for available rebates or tax incentives.
-
Is a SWH environmentally friendly?Yes, SWH is environmentally friendly. They reduce reliance on fossil fuels, lower greenhouse gas emissions, and use a renewable energy source—sunlight—to heat water
-
Can a SWH be used in large-scale applications, like in commercial buildings or industries?Yes,SWH can be scaled up for commercial and industrial use. Larger systems with more extensive collector arrays and storage capacity can provide hot water for hotels, hospitals, factories, and other large facilities.
-
What are the main functions of a Multiport Valve?Service: Normal filtration or softening operation. Backwash: Reverses the flow of water through the filter to clean it. Rinse: Cleans the filter bed after backwashing. Drain: Removes waste water from the system. Pre-filter: Sometimes included to pre-treat incoming water.
-
How do I install a Multi-port Valve?Preparation: Ensure the system is off and depressurized. Connection: Attach the valve to the filter or tank according to the manufacturer's instructions. Plumbing: Connect the inlet, outlet, and drain ports as per the schematic provided. Programming: Set up the control panel according to your system’s needs. Testing: Check for leaks and proper operation.
-
How often should I perform maintenance on the valve?Routine maintenance generally involves checking for leaks, ensuring proper operation, and cleaning the valve if necessary. Follow the manufacturer's recommended maintenance schedule for your specific model.
-
What should I do if the valve is not functioning correctly?Check Power Supply: Ensure the valve is receiving power. Inspect Connections: Verify all connections are secure. Look for Obstructions: Check for any blockages or clogs in the valve. Consult Manual: Refer to the troubleshooting section of the valve’s manual.
-
Can I use a Multi port Valve with any water treatment system?Multi port Valves are designed for compatibility with a range of water treatment systems. However, ensure that the valve specifications match the requirements of your system, including flow rates and pressure ratings.
-
How do I know which size valve I need?Valve size is based on the flow rate and size of the filter or tank. Check your system’s specifications or consult with the manufacturer to choose the appropriate valve size.
-
Where can I find replacement parts for my Multiport valve?Replacement parts can typically be obtained from authorized Runxin dealers or distributors. You can also contact Run-xin directly for assistance with parts.